RDF System Management Manual for J-series and H-series RVUs (RDF Update 13)

Effect
The command fails.
Recovery
When issuing the INITIALIZE RDF using an IN file to RDFCOM with "#" operator, specify "!"
operator also.
Illegal File Format: error#
error#
is the NEWPROCESS error number that identifies the specific error.
Cause
A NEWPROCESS error occurred during START RDF or TAKEOVER processing.
Effect
The START RDF or TAKEOVER operation is aborted.
Recovery
See the Operator Messages Manual for a description of the error code. For additional details
about understanding and correcting process errors, see the Guardian Procedure Errors and
Messages Manual. If possible, correct the error and reenter the command that encountered the
error. Otherwise, see your system manager.
Illegal Home Terminal: error#
error#
is the NEWPROCESS error number that identifies the specific error.
Cause
A NEWPROCESS error occurred during START RDF or TAKEOVER processing.
Effect
The START RDF or TAKEOVER operation is aborted.
Recovery
See the Operator Messages Manual for a description of the error code. For additional details
about understanding and correcting process errors, see the Guardian Procedure Errors and
Messages Manual. Correct the error and reenter the START RDF or TAKEOVER command.
Image files needed for Triple Contingency must have been purged because
the receiver’s retaincount must have been set too low.
Cause
Audit required for the COPYAUDIT command on the remote system has been purged, probably
because the receiver’s RETAINCOUNT value was set too low.
Effect
The COPYAUDIT command aborts.
Recovery
There might be no recovery for this problem. You must perform the database synchronization
without the help of RDFCOM.
IMAGETRAIL for IMAGEVOLUME vol-name does not exist
vol-name
is the image trail volume for which the image trail does not exist.
Cause
You tried to add an updater, but have not yet added an image trail for the updater’s volume.
Effect
The ADD command fails.
RDFCOM Messages 437