RDF System Management Manual for J-series and H-series RVUs (RDF Update 13)

Recovery
Reenter the command, using a correct volume name.
Inconsistent network options are not allowed
Cause
You have attempted to add the RDF configuration record with the RDF NetworkMaster attribute
on but the Network attribute off.
Effect
The configuration command fails.
Recovery
You must determine whether you are in an RDF network or not.
Initialization point for timestamp has been found
timestamp
is an INITTIME timestamp specified previously by an operator in an RDFCOM INITIALIZE
RDF command.
Cause
You are attempting to initialize RDF to a timestamp that is earlier than the current time, and
database synchronization is not involved. A record whose timestamp is less than timestamp
has been found.
Effect
The RDFCOM INITIALIZE RDF command continues.
Recovery
This is an informational message; no recovery is required.
Initialization timestamp is timestamp
timestamp
is an INITTIME timestamp specified previously by an operator in an RDFCOM INITIALIZE
RDF command.
Cause
You are attempting to initialize RDF to a timestamp that is earlier than the current time, and
database synchronization is not involved. A record whose timestamp is less than timestamp
has been found, and timestamp has been stored in the RDF configuration record.
Effect
The RDFCOM INITIALIZE RDF command continues.
Recovery
This is an informational message; no recovery is required.
Initialization with database synchronization is only available with the
NonStop(TM) RDF/IMP(X) product.
Cause
You tried to initialize RDF with the SYNCHDBTIME option, but RDF/IMP or IMPX is not installed.
Effect
The INITIALIZE RDF command fails.
Recovery
If you want to perform online database synchronization, RDF/IMP or IMPX must be installed on
both the primary and backup systems.
INITIALIZE RDF aborted
440 Messages