RDF System Management Manual for J-series and H-series RVUs (RDF Update 13)

Cause
The COPYAUDIT command encountered the specified error while attempting to position into a
local image file on the local image trail.
Effect
The COPYAUDIT command aborts.
Recovery
See the Operator Messages Manual for a description of the error code. For additional details
about understanding and correcting file-system errors, see the Guardian Procedure Errors and
Messages Manual. If possible, correct the error and reenter the COPYAUDIT command.
Otherwise, contact your service provider.
Position error error# on new image file filename
error#
is the file-system error number that identifies the specific error.
filename
is the name of the image trail file associated with the error.
Cause
The COPYAUDIT command encountered the specified error while attempting to position into the
specified image file on the local image trail volume.
Effect
The COPYAUDIT command aborts.
Recovery
See the Operator Messages Manual for a description of the error code. For additional details
about understanding and correcting file-system errors, see the Guardian Procedure Errors and
Messages Manual. If possible, correct the error and reenter the COPYAUDIT command.
Otherwise, contact your service provider.
Position error error# on remote image file
error#
is the file-system error number that identifies the specific error.
Cause
The COPYAUDIT command encountered the specified error while attempting to position into a
remote image file on the remote image trail.
Effect
The COPYAUDIT command aborts.
Recovery
See the Operator Messages Manual for a description of the error code. For additional details
about understanding and correcting file-system errors, see the Guardian Procedure Errors and
Messages Manual. If possible, correct the error and reenter the COPYAUDIT command.
Otherwise, contact your service provider.
Position error error# on report file filename.
error#
is the file-system error number that identifies the specific error.
filename
is the name of the file name you specified for generating the report.
Cause
When a VALIDATE CONFIGURATION or LIST UPDATERFILEOPENS command is executed, when
writing in to the user specified report file, RDFCOM determined that positioning to the EOF
failed.
RDFCOM Messages 453