RDF System Management Manual for J-series and H-series RVUs (RDF Update 13)

Effect
The command fails.
Recovery
Assign a new name to the process. Then, reenter the START RDF or VALIDATE command.
Process procname already used in local system.
procname
is the name of the RDF process you specified in the current configuration.
Cause
When a START RDF command or a VALIDATE CONFIGURATION command is executed,
RDFCOM determined that a user specified process name is already in use in a local system.
Effect
The command fails.
Recovery
Assign a new name to the process. Then, reenter the START RDF or VALIDATE command.
Process procname already used in remote system.
procname
is the name of the user specified RDF process name in the current configuration
Cause
During execution of a START RDF command or a VALIDATE CONFIGURATION command,
RDFCOM determined that a user specified process name is already in use in a remote system.
Effect
The command fails.
Recovery
Assign a new name to the process and re-enter the START RDF or VALIDATE command
Program and Library File are the Same
Cause
A NEWPROCESS error occurred during START RDF or TAKEOVER processing.
Effect
The START RDF or TAKEOVER operation is aborted.
Recovery
Change the library filename.
Program File Error: error# on progfile
error#
is the error number that identifies the specific error.
progfile
is the name of the program file on which the error was encountered.
Cause
A NEWPROCESS error occurred during START RDF or TAKEOVER processing.
Effect
The START RDF or TAKEOVER operation is aborted.
Recovery
See the Operator Messages Manual for a description of the error code. For additional details
about understanding and correcting process errors, see the Guardian Procedure Errors and
Messages Manual. If possible, correct the error and reenter the command that encountered the
error. Otherwise, see your system manager.
RDFCOM Messages 455