RDF System Management Manual for J-series and H-series RVUs (RDF Update 13)

Cause
You are attempting to execute the RDFCOM STOP SYNCH command, but either the RDF product
is not running or another critical operation is already in progress.
Effect
The RDFCOM STOP SYNCH command aborts.
Recovery
Correct the situation and then reissue the command.
STOP SYNCH command is aborted because database synchronization is not
in progress.
Cause
You are attempting to execute an RDFCOM STOP SYNCH command, but online database
synchronization is not in progress.
Effect
The RDFCOM STOP SYNCH command aborts.
Recovery
You can only execute the STOP SYNCH command if the RDF product is currently involved in
online database synchronization. Because the RDF product is not involved in a database
synchronization, this is an informational message; no recovery is required.
STOP UPDATE in progress, Please Wait...
Cause
A STOP UPDATE command is being executed.
Effect
The stop operation continues for the updater process.
Recovery
This is an informational message; no recovery is required.
STOP UPDATE request could not be completed
Cause
You entered a STOP UPDATE command, but the monitor could not send stop messages to all
updater processes and has logged RDF error 841 to the EMS event log.
Effect
Some updaters might have shut down, but others never received the stop message and are still
running. The receiver and monitor cannot now identify these updaters, and you cannot stop
them with another STOP UPDATE command or a STOP RDF command.
Recovery
All remaining updaters must be manually stopped from the TACL interface (for example, with a
TACL STOP $UPD1 command). Examine the EMS event log for the error message 841; this
message contains the Guardian error number that the monitor received when attempting to stop
the updater.
Storing missing audit in the imagetrail.
Cause
The COPYAUDIT command has located the missing audit for the image trail identified in the
previous message and is ready to move that audit from the remote system to the local system.
Effect
The COPYAUDIT command moves the audit to the local system.
Recovery
This is an informational message; no recovery is required.
RDFCOM Messages 467