RDF System Management Manual for J-series and H-series RVUs (RDF Update 13)

Cause
An illegal command was encountered within an OBEY command file.
Effect
The command fails.
Recovery
Remove the command from the OBEY command file, and reenter the command directly from
your terminal.
This RDF subsystem is not configured in the network master subsystem
Cause
Your current RDF subsystem is not listed in your the configuration of your network master.
Effect
Validation fails.
Recovery
You must reconfigure your network master and possibly your local configuration.
TMF is having trouble.
Cause
There is a problem with TMF.
Effect
The configuration validation fails.
Recovery
Check the status of TMF. When TMF is operational, reenter the command.
TMF is not configured.
Cause
TMF has not been configured.
Effect
The requested RDFCOM operation fails.
Recovery
Configure and start TMF, and request the RDFCOM operation again.
TMF is not running.
Cause
While either attempting to validate the RDF configuration or to start RDF, RDFCOM discovered
that TMF is not running.
Effect
The command fails.
Recovery
Start TMF. Then validate your configuration and start RDF.
TMF is not started yet.
Cause
TMF has not been started.
Effect
The requested RDFCOM operation fails.
RDFCOM Messages 475