RDF System Management Manual for J-series and H-series RVUs (RDF Update 13)

Undefined Externals
Cause
A NEWPROCESS error occurred during START RDF or TAKEOVER processing.
Effect
The operation is aborted.
Recovery
This is an internal error. Contact the Global Mission Critical Solution Center (GMCSC) or your
service provider.
Unidentifiable newprocess error: newproc0:7:newproc8:15
newproc#
identifies the new process error.
Cause
A NEWPROCESS error occurred during START RDF or TAKEOVER processing.
Effect
The command fails.
Recovery
See the Operator Messages Manual for a description of the error. For additional details about
understanding and correcting process errors, see the Guardian Procedure Errors and Messages
Manual. If possible, correct the error and reenter the command that encountered the error.
Otherwise, see your system manager.
Unlicensed Privileged Program
Cause
A NEWPROCESS error occurred during START RDF or TAKEOVER processing.
Effect
The operation is aborted.
Recovery
License the program, using the File Utility Program (FUP).
UPDATE is already off
Cause
A STOP UPDATE command was issued when updating is disabled.
Effect
The command fails.
Recovery
This is an informational message; no recovery is required.
UPDATE is already on
Cause
A START UPDATE command was issued when updating is enabled.
Effect
The command fails.
Recovery
This is an informational message; no recovery is required.
UPDATE request could not be performed
Cause
RDFCOM could not execute a START UPDATE or STOP UPDATE command.
RDFCOM Messages 479