RDF System Management Manual for J-series and H-series RVUs (RDF Update 13)

Recovery
Alter the particular updater’s ATINDEX value to match the appropriate audit trail number or
delete the updater.
VOLUME volume UPDATEVOLUME does NOT exist
volume
is the volume on the primary node for which the updater is responsible.
Cause
The RDF configuration file is invalid.
Effect
RDF will not start.
Recovery
Bring the volume up, or delete it from the RDF configuration.
VOLUME volume record NOT found
volume
is the volume on the primary node for which the updater is responsible.
Cause
The INFO command could not find an updater record for volume in the configuration file.
Effect
The command fails.
Recovery
Alter the configuration to include the updater process.
WARNING - BACKUPSWAP parameter has no effect, KMSF swap volume takes
precedence
Cause
The user attempted to SET or ALTER the RDF BACKUPSWAP parameter.
Effect
This parameter no longer has any effect. The KMSF subsystem controls the placement of the RDF
processes’ swap files.
Recovery
This is an informational message; no recovery is required.
*** Warning *** FASTUPDATEMODE is already OFF.
Cause
You have tried to turn FASTUPDATEMODE OFF for a Receiver when it was already OFF.
Effect
The command is ignored.
Recovery
This is an informational message; no recovery is required.
*** Warning *** FASTUPDATEMODE is already ON.
Cause
You have tried to turn FASTUPDATEMODE ON for a Receiver when it was already ON.
Effect
The command is ignored.
Recovery
This is an informational message; no recovery is required.
482 Messages