RDF System Management Manual for J-series and H-series RVUs (RDF Update 13)

Recovery
Online modification of INCLUDE/EXCLUDE lists does not support Wildcard characters. Please
re-issue the ALTER command without the wildcard characters.
Write error error# on attempt to reach the extractor, STOP SYNCH command
aborted.
error#
is the file-system error number that identifies the specific error.
Cause
You are attempting to execute an RDFCOM STOP SYNCH command, but RDFCOM encountered
the specified error while sending the message to the extractor.
Effect
The STOP SYNCH command aborts.
Recovery
See the Operator Messages Manual for a description of the error code. For additional details
about understanding and correcting file-system errors, see the Guardian Procedure Errors and
Messages Manual. Correct the problem and reissue the STOP SYNCH command.
Write error error# on local image file
error#
is the file-system error number that identifies the specific error.
Cause
The COPYAUDIT command encountered the specified error while attempting to write data to a
local image file on the local image trail.
Effect
The COPYAUDIT command aborts.
Recovery
See the Operator Messages Manual for a description of the error code. For additional details
about understanding and correcting file-system errors, see the Guardian Procedure Errors and
Messages Manual. If possible, correct the error and reenter the COPYAUDIT command.
Otherwise, see your system manager.
Write error error# on local ZFILEINC file
error#
is the file-system error number that identifies the specific error.
Cause
The COPYAUDIT command encountered the specified error while attempting to write data to
the local ZFILEINC file.
Effect
The COPYAUDIT command aborts.
Recovery
See the Operator Messages Manual for a description of the error code. For additional details
about understanding and correcting file-system errors, see the Guardian Procedure Errors and
Messages Manual. If possible, correct the underlying error and reenter the COPYAUDIT command.
Otherwise, contact your service provider.
Write error error# on new image file filename
error#
is the file-system error number that identifies the specific error.
filename
is the name of the image trail file associated with the error.
RDFCOM Messages 485