RDF System Management Manual for J-series and H-series RVUs (RDF Update 13)

Table 5 RDFCOM Configuration Commands (continued)
FunctionObjectCommand
Resets all option values in the
configuration memory table to their
default values for the specified process.
RESET IMAGETRAIL;RDF;
PURGER;MONITOR;
RDFNET;EXTRACTOR;
NETWORK;RECEIVER;
TRIGGER;VOLUME;
Adds option values to the configuration
memory table for the specified process.
SET IMAGETRAIL;RDF;
PURGER;MONITOR;
RDFNET;EXTRACTOR;
NETWORK;RECEIVER;
TRIGGER;VOLUME;
Lists current option values from the
configuration memory table for the
specified process.
SHOW VOLUME;RDF;
PURGER;MONITOR;
RDFNET;EXTRACTOR;
NETWORK;RECEIVER;
TRIGGER;IMAGETRAIL;
Operational Commands
RDFCOM operational commands and their functions are listed in Table 4-2. All of these commands
except STATUS can be issued only by members of the super ID group; STATUS can be issued by
anyone.
Table 6 RDFCOM Operational Commands
FunctionObjectCommand
Copies missing audit records from the
backup system that has the most audit
- -;COPYAUDIT
to the one that has the least audit (use
this command only if you have
configured RDF for Triple Contingency)
Displays the details of the number of
files that are currently open by the
UPDATERFILEOPENS;LIST
Updater processes. This command can
run either for a single Updater process
or for all the Updater processes in the
RDF configuration. This command can
run only when RDF is up and RDF
Updaters are running.
Starts RDF.RDF;START
Starts all updater processes on the
backup system.
UPDATE;START
Lists current information about RDF
processes.
STATUS PROCESS;MONITOR;
VOLUME;RDF;
RTDWARNING;EXTRACTOR;
RDFNET;RECEIVER;
PURGER;
Stops RDF.RDF;STOP
Signals the end of all necessary load
and BACKUP operations during online
database synchronization.
SYNCH;STOP
Stops all updater processes on the
backup system.
UPDATE;STOP
Running RDFCOM 95