RDF System Management Manual for J-series and H-series RVUs (RDF Update 13)

Requesting Online Help
Through the RDFCOM HELP command, you can display brief descriptions of:
• RDFCOM command syntax (including syntax for the HELP command itself)
• Numbered RDF messages (such as 700, 705, and so forth)
The HELP text is intended as a reminder, not as a substitute for this manual.
Help for Command Syntax
To obtain syntax information for an individual command, enter HELP followed by the command
name. For example, to display the ADD command syntax, enter:
]HELP ADD
RDFCOM displays the following:
{ RDF }
{ MONITOR }
{ EXTRACTOR }
{ RECEIVER }
ADD { IMAGETRAIL $volume }
{ PURGER }
{ RDFNET }
{ NETWORK }
{ TRIGGER trigger-type }
{ VOLUME $volume }
{ $volume }
Cannot be performed with RDF running.
Only a user in the SUPER group can execute this command.
To obtain a list of the available RDFCOM commands, enter:
]HELP ALL
RDFCOM displays the following information:
Help is available for the following:
Configuration Commands:
ADD
ALTER { RDF | MONITOR | EXTRACTOR | RECEIVER | PURGER |
TRIGGER | RDFNET | VOLUME }
DELETE
INFO
INITIALIZE
RESET
SHOW
SET { RDF | MONITOR | EXTRACTOR | RECEIVER | IMAGETRAIL |
PURGER | NETWORK | RDFNET | TRIGGER | VOLUME }
Operational Commands:
COPYAUDIT
LIST
START
STATUS
STOP
TAKEOVER
UNPINAUDIT
VALIDATE
Utility Commands:
EXIT
Running RDFCOM 97