Safeguard Reference Manual (G06.24+, H06.03+ )

User Security Commands
Safeguard Reference Manual—520618-013
5-56
SHOW USER Command
CI-CPU = { num | ANY }
either gives the number of the CPU in which the command interpreter runs or
indicates any CPU is used.
CI-PRI = { num | * NONE * }
either gives the priority at which the command interpreter runs or indicates that no
priority is assigned in the user record.
CI-PARAM-TEXT = [ text ]
either gives the startup parameter text supplied to the command interpreter or
appears blank to indicate that no parameter is supplied.
INITIAL-PROGTYPE = prog-type
gives the initial program type: PROGRAM, WINDOW, or SERVICE.
INITIAL-PROGRAM = [ prog-path ]
either gives the initial program pathname or appears blank to indicate that no
pathname is defined.
INITIAL-DIRECTORY = [ dir-path ]
either gives the initial directory pathname or appears blank to indicate that no
pathname is defined.
SUBJECT DEFAULT-PROTECTION SECTION
either gives the default protection to be assigned to the user’s disk files or indicates
that no default protection is defined.
SUBJECT OWNER-LIST SECTION
lists the secondary owners of the user authentication record.
Examples
1. This sample SHOW USER command displays the predefined user-attribute
settings for the user ID 86,2:
=SHOW USER