Safeguard Reference Manual (G06.24+, H06.03+ )

User Alias Security Commands
Safeguard Reference Manual—520618-013
6-32
RESET ALIAS Command
SUBJECT DEFAULT PROTECTION SECTION
shows the default protection assigned to the user’s disk files when they are added
to the Safeguard database.
OWNER-LIST-SECTION
is a list of the secondary owners of the user’s authentication record.
Examples
1. This example of the INFO ALIAS command displays the user attributes for the
alias fredX before and after the alias is frozen:
=INFO ALIAS fredX
=FREEZE ALIAS fredX
=INFO ALIAS fredX
2. This command displays the group list for each alias that is a member of the group
Rev40:
=INFO ALIAS *, GROUP, WHERE GROUP=Rev40
RESET ALIAS Command
RESET ALIAS resets the current default values for user attributes to predefined
values. (The predefined reset values are the values of the default user attributes when
you begin a SAFECOM session.)
When you add an alias to your system, the current default user attribute values are
used for any attributes you do not specify in the ADD ALIAS command. (Use the SET
ALIAS command to set the default user attribute values to specific values.)
RESET ALIAS
entered with no user-attribute-keyword, resets all current default user
attribute values to their predefined values.
NAME USER-ID OWNER STATUS
fredX 86,21 86,255 THAWED
NAME USER-ID OWNER STATUS
fredX 86,21 86,255 FROZEN
RESET ALIAS [ [ , ] user-attribute-keyword ]
[ , user-attribute-keyword ] ...