Safeguard Reference Manual (G06.24+, H06.03+ )

User Alias Security Commands
Safeguard Reference Manual—520618-013
6-37
SET ALIAS Command
The report shows:
SET ALIAS Command
SET ALIAS establishes current default values for one or more user attributes. Later,
when you add an alias to your system, these current default values are used for any
attribute you do not specify in the ADD ALIAS command.
After you set the current default values, use the SHOW ALIAS command to display
them before you add an alias through ADD ALIAS.
ALIAS
specifies ALIAS as the object type of the SET command. Omit it if ALIAS is the
assumed type. (For more information, see the ASSUME Command on page 4-3.)
LIKE user
sets the current default user attribute values to the same as those currently defined
for the user or alias specified with user.
TYPE OWNER
ALIAS 86,255
PASSWORD =
USER-EXPIRES = * NONE *
PASSWORD-EXPIRES = * NONE *
PASSWORD-MUST-CHANGE EVERY = * NONE *
PASSWORD-EXPIRY-GRACE = * NONE *
GUARDIAN DEFAULT SECURITY = OOOO
GUARDIAN DEFAULT VOLUME = $SYSTEM.NOSUBVOL
AUDIT-AUTHENTICATE-PASS = NONE AUDIT-MANAGE-PASS = NONE
AUDIT-AUTHENTICATE-FAIL = NONE AUDIT-MANAGE-FAIL = NONE
AUDIT-USER-ACTION-PASS = NONE
AUDIT-USER-ACTION-FAIL = NONE
TEXT-DESCRIPTION =
CI-PROG = * NONE *
CI-LIB = * NONE *
CI-NAME = * NONE *
CI-SWAP = * NONE *
CI-CPU = ANY
CI-PRI = * NONE *
CI-PARAM-TEXT =
INITIAL-PROGTYPE = PROGRAM
INITIAL-PROGRAM =
INITIAL-DIRECTORY =
SUBJECT DEFAULT-PROTECTION SECTION UNDEFINED!
SUBJECT OWNER-LIST SECTION UNDEFINED!
SET ALIAS [ , ] { LIKE user | user-attribute }
[ , user-attribute ] ...