Safeguard Reference Manual (G06.24+, H06.03+ )

User Alias Security Commands
Safeguard Reference Manual—520618-013
6-39
SET ALIAS Command
OWNER [owner-id]
specifies the primary owner of an alias authentication record. For owner-id,
specify either of:
[\*.]group-name.member-name
[\*.]group-num , member-num
If you omit owner-id, your user ID becomes the current owner-id.
OWNER-LIST [[-]user-list]
changes the secondary ownership of an alias authentication record by adding
or deleting owners in the owner list. A minus sign (-) preceding user-list
indicates that the specified users are to be deleted from the existing owner list.
If the minus sign is omitted, the specified users are added to the owner list. If
user-list is omitted, the owner list is set to null (no secondary owners) A
maximum of 50 users can be specified in user-list. For user-list,
specify either:
net-user-spec
(net-user-spec [, net-user-spec ...])
net-user-spec is either:
[\node-spec.]group-name.user-name
[\node-spec.]group-num , user-num
node-spec is one of:
*
node-name
node-number
node-name
specifies the system name.
node-number
specifies the Expand node number.
PASSWORD [password]
specifies a logon password for the alias. Typically, users must enter their alias
and a password to log on to a system.
For password, specify the logon password, which can be one to eight
characters long. Use any alphanumeric characters except blanks, commas,
semicolons, and the ASCII null character. The case of letters in a password is