Safeguard Reference Manual (G06.24+, H06.03+ )

Group Commands
Safeguard Reference Manual—520618-013
7-10
INFO GROUP Command
Considerations
•
Unlike an administrative group that is created implicitly with the ADD USER
command, a group created with the ADD GROUP command is not deleted
automatically when its last member is deleted. (For additional details, see the INFO
GROUP Detailed Report on page 7-11.)
Examples
The following command deletes the group definition record for group Firefly2:
=DELETE GROUP Firefly2
INFO GROUP Command
The INFO GROUP command shows the group attributes stored in a specified group
definition record.
Only the record owner, that owner’s group manager, and the super ID user can view
their group details by executing the INFO GROUP command.
[ NAME ] name-list
specifies the name of the group or groups for which information is to be displayed.
name-list
specifies one or more groups for which definition records are to be displayed.
The name-list can contain up to 32 entries.
name-list can be either of:
group-name
( group-name [ , group-name ] ... )
group-name
can be any group name. The name can contain wild-card characters.
NUMBER num-list
specifies the numeric ID of the group or groups for which definition records are to
be displayed. The num-list can contain up to 32 entries.
num-list
specifies one or more groups for which definition records are to be altered.
INFO GROUP { [ NAME ] name-list | NUMBER num-list }
[ [ , ] DETAIL ]