Safeguard Reference Manual (G06.24+, H06.03+ )

Disk-File Security Commands

Safeguard Reference Manual—520618-013

8-69

SHOW DISKFILE Command

OUT listfile

directs the SHOW DISKFILE report to listfile. After it executes the SHOW

command, SAFECOM redirects its output to the current OUT file.

For listfile, specify any file name. SAFECOM opens listfile and appends

the SHOW DISKFILE report to the file. If listfile does not exist, SAFECOM

creates an EDIT-format file and then writes the SHOW DISKFILE report to that file.

DISKFILE

specifies DISKFILE as the object type of the SHOW command. Omit it if DISKFILE

is the assumed object type. (For more information on assumed object types, see

the ASSUME Command on page 4-3.)

SHOW DISKFILE Report Format

The SHOW DISKFILE command displays the disk-file attributes and their current

default values in the format shown in Figure 8-3.

The SHOW DISKFILE report displays these disk file attributes and values:

OWNER gn, un

is the user ID (group number and member number) of the user who will own this

disk-file authorization record if a file with these attribute values is added to

Safeguard protection.

WARNING-MODE

{ON|OFF}

is the current warning-mode state of this disk file. ON indicates that the protection

record is in warning mode. The initial value is OFF, which indicates that warning

mode is disabled for this disk file.

Figure 8-3. SHOW DISKFILE Report Format

TYPE OWNER WARNING-MODE

DISKFILE gn,un {ON|OFF}

AUDIT-ACCESS-PASS = a-spec AUDIT-MANAGE-PASS = a-spec

AUDIT-ACCESS-FAIL = a-spec AUDIT-MANAGE-FAIL = a-spec

LICENSE={ON|OFF} PROGID={ON|OFF} CLEARONPURGE={ON|OFF} PERSISTENT={ON|OFF}

TRUST ={ME|SHARED|OFF} (H-series only)

user-spec [DENY] authority-list

. . .

[ NO ACCESS CONTROL LIST DEFINED! ]