Safeguard Reference Manual (G06.24+, H06.03+ )

Disk-File Security Commands
Safeguard Reference Manual—520618-013
8-70
SHOW DISKFILE Command
AUDIT-ACCESS-PASS = a-spec AUDIT-MANAGE-PASS = a-spec
AUDIT-ACCESS-FAIL = a-spec AUDIT-MANAGE-FAIL = a-spec
indicate the conditions under which the Safeguard software audits attempts to
access this file or to change or read its authorization record. These four fields are
described under the SET DISKFILE Command on page 8-55.
LICENSE = { ON|OFF }
indicates whether the LICENSE attribute is set on. For more information, see the
INFO DISKFILE Command on page 8-41.
PROGID = { ON|OFF }
indicates whether the PROGID attribute is set on. For more information, see the
INFO DISKFILE Command on page 8-41.
CLEARONPURGE = { ON|OFF }
indicates whether the CLEARONPURGE attribute is set on. For more information,
see the INFO DISKFILE Command on page 8-41.
PERSISTENT = { ON|OFF }
indicates whether the PERSISTENT attribute is set on. For more information, see
the INFO DISKFILE Command on page 8-41.
TRUST = { ME|SHARED|OFF }
is the current default setting of the TRUST attribute. For more information, see the
INFO DISKFILE Command on page 8-41. This attribute appears only on systems
running H-series RVUs.
user-spec [DENY] authority-list
is a current default ACL entry for disk files. For more information, see the INFO
DISKFILE Command on page 8-41.
[ NO ACCESS CONTROL LIST DEFINED! ]
indicates that no default ACL is defined. Use SET DISKFILE...ACCESS to define
default ACL entries, or use ADD DISKFILE... ACCESS to define ACL entries when
you create an authorization record for a disk file.
Caution. If you do not specify an ACL for a disk file, only the local super ID can access the
file. However, the owner of the file can alter the authorization record to authorize access.