Safeguard Reference Manual (G06.24+, H06.03+ )

Disk Volume and Subvolume Security Commands
Safeguard Reference Manual—520618-013
9-23
INFO VOLUME and SUBVOLUME Commands
[ NO ACCESS CONTROL LIST DEFINED! ]
indicates this volume or subvolume has no default ACL. Use ALTER...ACCESS to
define ACL entries. Only the local super ID can access a volume or subvolume that
has no ACL.
INFO VOLUME and SUBVOLUME Detailed Report
The detailed INFO VOLUME and SUBVOLUME report includes the auditing
specifications for the protected volume or subvolume. Figure 9-2shows the format of
the detailed INFO VOLUME and SUBVOLUME report.
In addition to the attributes displayed in the brief INFO report, the detailed INFO report
displays these attribute values:
AUDIT-ACCESS-PASS = a-spec AUDIT-MANAGE-PASS = a-spec
AUDIT-ACCESS-FAIL = a-spec AUDIT-MANAGE-FAIL = a-spec
These values indicate the conditions under which the Safeguard software audits
attempts to create a disk file on this volume or subvolume and attempts to manage this
authorization record.
a-spec can be:
{ ALL | LOCAL | REMOTE | NONE }
For a full description of each a-spec, see the appropriate audit-spec under the
SET VOLUME and SUBVOLUME Commands on page 9-26.
P PURGE authority for the volume or subvolume
C CREATE authority for the volume or subvolume
O OWNER authority for the volume or subvolume
Figure 9-2. INFO VOLUME and SUBVOLUME Detailed Report Format
LAST-MODIFIED OWNER STATUS WARNING-MODE
$volume[.subvol]
date, time owner-id status {ON|OFF}
user-spec [DENY] authority
user-spec [DENY] authority
.
.
.
[ NO ACCESS CONTROL LIST DEFINED! ]
AUDIT-ACCESS-PASS = a-spec AUDIT-MANAGE-PASS = a-spec
AUDIT-ACCESS-FAIL = a-spec AUDIT-MANAGE-FAIL = a-spec