Safeguard Reference Manual (G06.24+, H06.03+ )

Disk Volume and Subvolume Security Commands

Safeguard Reference Manual—520618-013

9-33

SHOW VOLUME and SUBVOLUME Commands

The SHOW report displays the following volume and subvolume attributes and values:

TYPE

{vol|svol}

indicates the object type for this SHOW command. {vol|svol} is either

VOLUME or SUBVOLUME.

OWNER gn,un

indicates the user ID (group number and member number) of the user who will own

this volume or subvolume authorization record if a volume or subvolume having

these attribute values is added to Safeguard protection.

WARNING-MODE

{ON|OFF}

is the current warning-mode state of this volume or subvolume. ON indicates that

the protection record is in warning mode. The initial value is OFF, which indicates

that warning mode is disabled for this volume or subvolume.

AUDIT-ACCESS-PASS = a-spec AUDIT-MANAGE-PASS = a-spec

AUDIT-ACCESS-FAIL = a-spec AUDIT-MANAGE-FAIL = a-spec

indicates the conditions under which the Safeguard software audits attempts to

create files on this volume or subvolume and attempts to manage this authorization

record. These fields are described in detail for audit-spec under the SET

{VOLUME|SUBVOLUME} command.

user-spec [DENY] authority

provides an ACL entry for this volume or subvolume. For more information, see

INFO VOLUME and SUBVOLUME Brief Report on page 9-20.

Figure 9-3. SHOW VOLUME and SUBVOLUME Report Format

TYPE OWNER WARNING-MODE

{vol|svol} gn,un {ON|OFF}

AUDIT-ACCESS-PASS = a-spec AUDIT-MANAGE-PASS = a-spec

AUDIT-ACCESS-FAIL = a-spec AUDIT-MANAGE-FAIL = a-spec

user-spec [DENY] authority

. . .

[ NO ACCESS CONTROL LIST DEFINED! ]