Safeguard Reference Manual (G06.24+, H06.03+ )

Device and Subdevice Security Commands
Safeguard Reference Manual—520618-013
10-11
ALTER DEVICE and SUBDEVICE Commands
LIKE device-name
adopts the existing device attribute values of device-name as the attribute values
to be used for the authorization record or records being altered. For the ACCESS
attribute, LIKE only adds ACL entries or adds authorities to existing entries. It does
not replace or delete ACL entries or authorities.
device-name
identifies the device whose current device-attribute values are to be
assigned to the device authorization record or records being altered. device-
name can be any device name.
subdevice-list
specifies one or more subdevices for which authorization records are to be
changed. subdevice-list can be either:
subdevice-name
( subdevice-name [ , subdevice-name ... ] )
subdevice-name
can be any subdevice name. The name can contain wild-card characters.
LIKE subdevice-name
adopts the existing device attribute values of subdevice-name as the attribute
values to be used for the authorization record or records being altered.
subdevice-name
identifies the subdevice whose current subdevice-attribute values are to
be assigned to the subdevice authorization record or records being changed.
subdevice-name can be any subdevice name.
device-attribute
changes the existing value of the specified device attribute for the devices or
subdevices being altered. The device-attribute variables are:
OWNER [owner-id]
ACCESS access-spec [ ; access-spec ] ...
AUDIT-ACCESS-PASS [audit-spec]
AUDIT-ACCESS-FAIL [audit-spec]
AUDIT-MANAGE-PASS [audit-spec]
AUDIT-MANAGE-FAIL [audit-spec]
WHERE WARNING-MODE
WARNING-MODE {ON|OFF}