Safeguard Reference Manual (G06.24+, H06.03+ )

Device and Subdevice Security Commands
Safeguard Reference Manual—520618-013
10-19
INFO DEVICE and SUBDEVICE Commands
Example
The owner of the authorization record for the device $TTYP enters this command to
suspend access to the device:
=FREEZE DEVICE $ttyp
INFO DEVICE and SUBDEVICE Commands
INFO DEVICE and SUBDEVICE displays the attribute values currently stored in an
authorization record. INFO DEVICE and SUBDEVICE produces two types of reports:
brief and detailed. The formats for the two report types are illustrated following the
syntax.
Any user can produce an INFO report on any protected device or subdevice.
OUT listfile
directs the INFO DEVICE or SUBDEVICE report to listfile. After executing the
INFO command, SAFECOM redirects device output to the current OUT file.
For listfile, specify any file name. SAFECOM opens listfile and appends
the INFO report to the file. If listfile does not exist, SAFECOM creates an
EDIT file by that name and writes the INFO report to that file.
device-list
specifies one or more devices for which INFO reports are to be produced.
device-list can be either:
device-name
( device-name [ , device-name ] ... )
device-name
can be any device name. The name can contain wild-card characters.
INFO [ / OUT listfile / ] DEVICE device-list
[ [ , ] DETAIL ]
INFO [ / OUT listfile / ] SUBDEVICE subdevice-list
[ [ , ] DETAIL ]