Safeguard Reference Manual (G06.24+, H06.03+ )

Device and Subdevice Security Commands
Safeguard Reference Manual—520618-013
10-21
INFO DEVICE and SUBDEVICE Commands
status
is the current status of this device or subdevice. status is either FROZEN or
THAWED.
WARNING-MODE
{ON|OFF}
is the current warning-mode state of this device or subdevice. ON indicates that
the protection record is in warning mode. The initial value is OFF, which indicates
that warning mode is disabled for this device or subdevice.
user-spec [DENY] authority-list
is an entry in the ACL defined for this device or subdevice. user-spec identifies a
single user or user group. authority-list is a list of single-character codes that
represent the access authorities granted to the user or user group identified by
user-spec. DENY indicates that the access authorities specified with
authority-list are specifically denied to the user or user group identified by
user-spec.
user-spec can be any of:
group-num , member-num
group-num,*
*,*
\node-spec.group-num , member-num
\node-spec.group-num,*
\node-spec.*,*
group-num, member-num identifies a single local user.
group-num,* identifies all the local users in the group that has group-num.
*,* identifies all the local users at the node to which this device or subdevice is
attached.
\node-spec.group-num, member-num identifies both the local user who has
user ID group-num, member-num and a network user who has the same user
name and user ID as that local user.
\node-spec.group-num,* identifies all the local users in the group identified
by group-num and all network users whose group-num and group-name
match those of the local group.
\node-spec.*,* identifies all local users on the node to which the device or
subdevice is attached as well as all network users who have access to the
node.
authority-list can contain these codes:
R - READ authority
W - WRITE authority
O - OWNER authority