Safeguard Reference Manual (G06.24+, H06.03+ )

Device and Subdevice Security Commands

Safeguard Reference Manual—520618-013

10-22

INFO DEVICE and SUBDEVICE Commands

[ NO ACCESS CONTROL LIST DEFINED! ]

appears for a device or subdevice that has no ACL. Use ALTER

DEVICE...ACCESS or ALTER SUBDEVICE...ACCESS to define ACL entries for an

existing authorization record. Only the local super ID can access a device or

subdevice for which no ACL is defined.

INFO DEVICE and SUBDEVICE Detailed Report

The detailed INFO DEVICE or SUBDEVICE report includes the auditing specifications

currently defined for the protected device or subdevice. The format of the detailed

INFO DEVICE report appears in Figure 10-2. The format of the detailed INFO

SUBDEVICE report is identical except for the subdevice name in place of the device

name.

In addition to the device attribute values displayed in the brief INFO DEVICE report,

the detailed INFO DEVICE report displays these attribute values:

AUDIT-ACCESS-PASS = a-spec AUDIT-MANAGE-PASS = a-spec

AUDIT-ACCESS-FAIL = a-spec AUDIT-MANAGE-FAIL = a-spec

These values indicate the conditions under which the Safeguard software audits

attempts to open this device or subdevice and to manage this authorization record.

a-spec can be:

{ ALL | LOCAL | REMOTE | NONE }

For a full description of each a-spec, see the appropriate audit-spec in SET

DEVICE and SUBDEVICE Commands on page 10-25.

Figure 10-2. INFO DEVICE Detailed Report Format

LAST-MODIFIED OWNER STATUS WARNING-MODE

$device

date, time owner-id status {ON|OFF}

user-spec [DENY] authority-list

[ NO ACCESS CONTROL LIST DEFINED! ]

AUDIT-ACCESS-PASS = a-spec AUDIT-MANAGE-PASS = a-spec

AUDIT-ACCESS-FAIL = a-spec AUDIT-MANAGE-FAIL = a-spec