Safeguard Reference Manual (G06.24+, H06.03+ )

Device and Subdevice Security Commands
Safeguard Reference Manual—520618-013
10-23
RESET DEVICE and SUBDEVICE Commands
Example
A sample brief INFO DEVICE report for a line printer follows:
=INFO DEVICE $lprint
This report gives these information:
•
The owner of this device authorization record is a network user who is the
manager for group 86 (with user ID 86,255).
•
All users who are members of group number 33 or 255 are granted both READ
and WRITE authority for the device $LPRINT.
•
All users who are members of group number 86, with one exception, are granted
both READ and WRITE authority for $LPRINT. User ID 86,2 is specifically denied
both READ and WRITE authority.
RESET DEVICE and SUBDEVICE Commands
RESET DEVICE or SUBDEVICE resets the current default attribute values to their
predefined values.
When you add an authorization record, the current default attribute values are used for
any attributes you do not specify with the ADD DEVICE or SUBDEVICE command. To
set the default attribute values to specific values, use SET DEVICE or SUBDEVICE.
device-attribute-keyword
sets the current default value of the specified attribute to its predefined value. The
device-attribute-keywords and their predefined values are:
OWNER The user ID of the current user
ACCESS Null (no access control list)
AUDIT-ACCESS-PASS NONE (no auditing)
AUDIT-ACCESS-FAIL NONE (no auditing)
LAST-MODIFIED OWNER STATUS WARNING-MODE
$LPRINT
18AUG86, 17:28 \*.86,255 THAWED OFF
086,002 DENY R,W
033,* R,W
086,* R,W
255,* R,W
RESET DEVICE [ [ , ] device-attribute-keyword ]
[ , device-attribute-keyword ] ...
RESET SUBDEVICE [ [ , ] device-attribute-keyword ]
[ , device-attribute-keyword ] ...