Safeguard Reference Manual (G06.24+, H06.03+ )

Device and Subdevice Security Commands
Safeguard Reference Manual—520618-013
10-24
RESET DEVICE and SUBDEVICE Commands
AUDIT-MANAGE-PASS NONE (no auditing)
AUDIT-MANAGE-FAIL NONE (no auditing)
WARNING-MODE OFF (warning mode disabled)
For a complete description of the device-attributes, see the SET DEVICE
and SUBDEVICE Commands on page 10-25.
Consideration
If you enter RESET DEVICE or RESET SUBDEVICE (or RESET when the assumed
object type is DEVICE or SUBDEVICE) and you do not include any device-
attribute-keyword, all the attributes are returned to their predefined values. The
predefined values are listed before in the syntax for RESET DEVICE or SUBDEVICE.
Example
In this example, a RESET DEVICE command restores only the current default device
ACL to its predefined value (that is, no ACL):
To display the current device status:
=SHOW DEVICE
The report shows:
To restore the default ACL:
=RESET DEVICE ACCESS
To display the reset device status:
=SHOW DEVICE
The report shows:
TYPE OWNER WARNING-MODE
DEVICE \*.86,255 OFF
AUDIT-ACCESS-PASS = ALL AUDIT-MANAGE-PASS = REMOTE
AUDIT-ACCESS-FAIL = NONE AUDIT-MANAGE-FAIL = ALL
255,255 R,W
\*.086,255 R,W
086,* R,W
TYPE OWNER WARNING-MODE
DEVICE \*.86,255 OFF
AUDIT-ACCESS-PASS = ALL AUDIT-MANAGE-PASS = REMOTE
AUDIT-ACCESS-FAIL = NONE AUDIT-MANAGE-FAIL = ALL
NO ACCESS CONTROL LIST DEFINED!