Safeguard Reference Manual (G06.24+, H06.03+ )

Device and Subdevice Security Commands
Safeguard Reference Manual—520618-013
10-25
SET DEVICE and SUBDEVICE Commands
SET DEVICE and SUBDEVICE Commands
SET DEVICE or SUBDEVICE establishes default values for one or more device
attributes. When you add an authorization record, the default attribute values are used
for any attributes you do not specify in your ADD DEVICE or SUBDEVICE command.
To display the current default values for the attribute, use the SHOW DEVICE or
SUBDEVICE command.
LIKE device-name
sets the current default device-attribute values to the same as the existing
values for device-name.
device-name
identifies a device whose existing attribute values are to be the current default
device-attribute values. device-name can be any device name.
LIKE subdevice-name
sets the current default device-attribute values to the same as the existing
values for subdevice-name.
subdevice-name
identifies a subdevice whose existing attribute values are to be the current
default device-attribute values. subdevice-name can be any subdevice
name.
device-attribute
defines a default value for the specified device attribute. The device-
attributes are:
OWNER [owner-id]
ACCESS access-spec [ ; access-spec ] ...
AUDIT-ACCESS-PASS [audit-spec]
AUDIT-ACCESS-FAIL [audit-spec]
AUDIT-MANAGE-PASS [audit-spec]
AUDIT-MANAGE-FAIL [audit-spec]
WARNING-MODE {ON|OFF}
SET DEVICE [ , ] { LIKE device-name | device-attribute }
[ , device-attribute ] ...
SET SUBDEVICE [ , ] { LIKE subdevice-name | device-attribute
}
[ , device-attribute ] ...