Safeguard Reference Manual (G06.24+, H06.03+ )

Process and Subprocess Security Commands
Safeguard Reference Manual—520618-013
11-11
ADD PROCESS and SUBPROCESS Commands
authority
is any one of:
R[EAD]
W[RITE]
C[REATE]
P[URGE]
O[WNER]
R and W are not valid for NAMED and UNNAMED processes.
C and P are not valid for subprocesses.
*
(asterisk) specifies all the process authorities (R, W, C, P, and O).
AUDIT-ACCESS-PASS [audit-spec]
changes the audit-spec for successful attempts to access the process or
subprocess name. The form of audit-spec is:
{ ALL | LOCAL | REMOTE | NONE }
For a description of each audit-spec, see the SET PROCESS and
SUBPROCESS Commands on page 11-27. Omitting audit-spec specifies
NONE.
AUDIT-ACCESS-FAIL [audit-spec]
changes the audit-spec for unsuccessful attempts to access the process or
subprocess name. The form of audit-spec is:
{ ALL | LOCAL | REMOTE | NONE }
For a description of each audit-spec, see the SET PROCESS and
SUBPROCESS Commands on page 11-27. Omitting audit-spec specifies
NONE.
AUDIT-MANAGE-PASS [audit-spec]
changes the audit-spec for successful attempts to manage (change or read)
this authorization record. The form of audit-spec is:
{ ALL | LOCAL | REMOTE | NONE }
For a description of each audit-spec, see the SET PROCESS and
SUBPROCESS Commands on page 11-27. Omitting audit-spec specifies
NONE.