Safeguard Reference Manual (G06.24+, H06.03+ )

Process and Subprocess Security Commands
Safeguard Reference Manual—520618-013
11-24
INFO PROCESS and SUBPROCESS Commands
user-spec has the forms:
group-num , member-num
group-num,*
*,*
\node-spec.group-num , member-num
\node-spec.group-num,*
\node-spec.*,*
group-num, member-num identifies a single local user.
group-num,* identifies all local users in the group that has group-num.
*.* identifies all local users on this process name’s node.
\node-spec.group-num, member-num identifies the local user who has user
ID group-num, member-num and a network user who has the same user
name and user ID as that local user.
\node-spec.group-num,* identifies all local users in the group that has
group-num and all network users in that group who also have the same
group-name as that of the local group who has group-num.
\node-spec.*,* identifies all local users on this process’s node and all network
users who have been granted access to the node.
authority-list can contain any of these codes:
[ NO ACCESS CONTROL LIST DEFINED! ]
indicates that this process has no ACL. Use ALTER PROCESS...ACCESS to add
ACL entries to an existing authorization record. Only the local super ID can access
a protected process name that has no ACL.
INFO PROCESS and SUBPROCESS Detailed Report
The detailed INFO PROCESS and SUBPROCESS report includes the auditing
specifications currently defined for the protected process name. Figure 11-2 on
page 11-25 shows the format of the detailed INFO PROCESS report. The report for an
INFO SUBPROCESS is similar, except that the name of the subprocess appears in
place of the name of the process.
R READ authority
W WRITE authority
C CREATE authority—the authority to create processes with this process
name. (This item is not valid for subprocesses.)
P PURGE authority (This item is not valid for subprocesses.)
O OWNER authority