Safeguard Reference Manual (G06.24+, H06.03+ )

OBJECTTYPE Security Commands
Safeguard Reference Manual—520618-013
12-26
SHOW OBJECTTYPE Command
ALL
All unsuccessful management attempts are audited.
LOCAL
Only unsuccessful management attempts made by local users are audited.
REMOTE
Only unsuccessful management attempts made by remote users are
audited.
NONE
No unsuccessful management attempts are audited.
Omitting audit-spec specifies NONE.
Example
These commands define default values for a new object class:
=SET OBJECTTYPE OWNER prs.manager
=SET OBJECTTYPE AUDIT-ACCESS-PASS all, &
=AUDIT-MANAGE-PASS local
=SET OBJECTTYPE ACCESS 33,* (c,o); (86,*, 255,*) *
=SET OBJECTTYPE ACCESS prs.harry DENY *
The default object-class attribute values defined here are:
•
The object-class owner is the manager of the PRS group.
•
The Safeguard software audits all successful attempts to add an authorization
record for a specific object, as well as successful local attempts to manage the
authorization record for that type.
•
All members of groups 33, 86, and 255 can create and own the object type (except
user PRS.HARRY, who is specifically denied access to the object type).
SHOW OBJECTTYPE Command
SHOW OBJECTTYPE displays the current default values for the OBJECTTYPE
attributes.
OUT
directs the SHOW OBJECTTYPE report to listfile. After it executes the SHOW
command, SAFECOM redirects its output to the current OUT file.
SHOW [ / OUT listfile / ] OBJECTTYPE