Safeguard Reference Manual (G06.24+, H06.03+ )

Event-Exit-Process Commands
Safeguard Reference Manual—520618-013
15-10
INFO EVENT-EXIT-PROCESS Command
The event exit must be disabled before its configuration record can be deleted.
If you have defined a SECURITY-ADMINISTRATOR security group, only members of
that group can use the DELETE EVENT-EXIT-PROCESS command. If you have not
defined the SECURITY-ADMINISTRATOR security group, any super-group member
can use this command.
name
specifies the name of the event-exit process-configuration record to be deleted.
Examples
1. To delete the configuration record for the event-exit process LOGON1:
=DELETE EVENT-EXIT-PROC logon1
INFO EVENT-EXIT-PROCESS Command
The INFO EVENT-EXIT-PROCESS command shows the event-exit attributes stored in
the specified event-exit configuration record. Only one event-exit name can be
specified in an INFO EVENT-EXIT-PROCESS command.
Any user can execute the INFO EVENT-EXIT-PROCESS command.
name
specifies the name of the event-exit process-configuration record for which an
INFO report is to be produced.
INFO EVENT-EXIT-PROCESS Report Format
Figure 15-1 on page 15-11shows the format of the INFO EVENT-EXIT-PROCESS
report.
DELETE EVENT-EXIT-PROCESS name
INFO EVENT-EXIT-PROCESS name