Safeguard Reference Manual (G06.24+, H06.03+ )

Event-Exit-Process Commands
Safeguard Reference Manual—520618-013
15-11
INFO EVENT-EXIT-PROCESS Command
The report contains these fields:
EVENT-EXIT-PROCESS = name
is the name of the event-exit-process configuration record.
ENABLED = { ON | OFF }
indicates whether the event-exit process is enabled.
RESPONSE-TIMEOUT = n SECONDS
is the maximum number of seconds that the Safeguard software waits for the
event-exit process to respond to an event.
ENABLE-AUTHENTICATION-EVENT = { ON | OFF }
indicates whether authentication events are sent to the event-exit process.
ENABLE-AUTHORIZATION-EVENT = { ON | OFF }
indicates whether authorization events are sent to the event-exit process.
ENABLE-PASSWORD-EVENT = { ON | OFF }
indicates whether password change events are sent to the event-exit process.
PROG = [ prog-filename ]
is the name of the object file of the event-exit process started when
ENABLED=ON.
LIB = [ lib-filename ]
is the name of the library file used with this event-exit process.
Figure 15-1. Detailed INFO EVENT-EXIT-PROCESS Report
EVENT-EXIT-PROCESS = name
ENABLED = { ON | OFF }
RESPONSE-TIMEOUT = n SECONDS
ENABLE-AUTHENTICATION-EVENT = { ON | OFF }
ENABLE-AUTHORIZATION-EVENT = { ON | OFF }
ENABLE-PASSWORD-EVENT = { ON | OFF }
PROG = [prog-filename]
LIB = [lib-filename]
SWAP = [$vol[.subvol.filename] ]
PNAME = [process-name]
CPU = {cpu-number \ ANY}
PRI = [priority]
PARAM-TEXT = [startup-param-text]