Safeguard Reference Manual (G06.24+, H06.03+ )

SAFECOM Error and Warning Messages
Safeguard Reference Manual—520618-013
A-25
Effect. The command is not executed.
Recovery. Correct the name and then retry the command.
Cause. A problem exists with the library file specified by the LIB option in a RUN
command.
Effect. The command is not executed.
Recovery. Look up the error number in the System Messages Manual and resolve the
problem according to instructions given there.
Cause. The LIB option in a RUN command specifies a library file that is locked.
Effect. The command is rejected.
Recovery. Wait until the library file is unlocked and retry the command.
Cause. An attribute other than the ACCESS attribute was specified more than once in
the same command.
Effect. The command is not executed.
Recovery. Reenter the command specifying each attribute only once.
Cause. You specified an audit file name in an incorrect format.
Effect. The command is not executed.
Recovery. Reenter the command using the proper format for the audit file name.
Cause. A NEWPROCESS failure occurred during the attempted execution of a RUN
command.
Effect. The command is not executed.
Recovery. Look up the error number in the Operator Messages Manual and resolve
the problem according to instructions given there.
LIBRARY FILE ERROR nnn
LIBRARY FILE IS LOCKED
MULTIPLE SPECIFICATIONS NOT ALLOWED (EXCEPT ACCESS); COMMAND NOT EXECUTED.
NAME MUST BE IN A0000000 FORMAT; COMMAND NOT EXECUTED.
NEWPROCESS ERROR nnnnnnn