Safeguard Reference Manual (G06.24+, H06.03+ )

SAFECOM Error and Warning Messages
Safeguard Reference Manual—520618-013
A-29
Recovery. Look up the error number in the System Messages Manual and resolve the
problem according to instructions given there.
Cause. A remote system named in the REMOTEPASSWORD attribute is not known at
your node, or a system specified in a GUARDIAN VOLUME attribute does not exist.
Effect. The command is not executed.
Recovery. Reenter the command with the correct system name or up the EXPAND
line handlers to make the system name known at your node.
Cause. A quoted string is not properly terminated with a trailing quote (") character.
Effect. The command is not executed.
Recovery. Fix the command by correctly terminating the quoted string and reenter the
command.
Cause. The current command contains a non-ASCII character (a character whose
octal representation value exceeds %177).
Effect. The command is not executed.
Recovery. Reenter the command. If the error persists, it might indicate either a
hardware problem or an internal error in SAFECOM. Contact your HP representative.
Cause. The command contains a name or keyword whose length exceeds 31
characters. Typically, this error occurs when a word is misspelled or when a missing
punctuation character causes two words to be concatenated.
Effect. The command is not executed.
Recovery. Correct the spelling of the name or keyword, or supply the missing
punctuation, and reenter the command.
SYSTEM SPECIFIED DOES NOT EXIST; COMMAND NOT EXECUTED.
THE ENDING QUOTE MARK IS MISSING; COMMAND NOT EXECUTED.
THIS CHARACTER IS UNRECOGNIZABLE; COMMAND NOT EXECUTED.
THIS NAME IS TOO LONG (> 31 CHARACTERS); COMMAND NOT EXECUTED.
THIS NAME MUST BE NO LONGER THAN n CHARACTERS; COMMAND NOT EXECUTED.