Safeguard Reference Manual (G06.24+, H06.03+ )

Common SAFECOM Language Elements
Safeguard Reference Manual—520618-013
2-15
Partially Qualified Subprocess Names
Examples
=ADD SUBPROCESS \argon.$pc12.#tl06
=INFO SUBPROCESS \ajax.$rpt*.#prt
=FREEZE SUBPROCESS \fred.$ted*.#clup
Partially Qualified Subprocess Names
Subprocess names can be partially qualified. As with device names, the only part of a
subprocess name you can omit is the system name. When you enter a subprocess
name without a system name, SAFECOM expands the partially qualified name by
adding the current default system name.
$process.#subprocess
is expanded to:
\system-name.$process.#subprocess
\system-name
is the current default system name.
Examples
=ADD SUBPROCESS $spell.#us002 LIKE $spell.#us001
=FREEZE SUBPROCESS $*.#pr*
=THAW SUBPROCESS $alto.#pr02
Subprocess Name Lists
A subprocess name list is a list of fully qualified or partially qualified subprocess
names. A subprocess name list specifies a group of subprocesses on which the same
operation is to be performed.
subprocess-name
is either a fully or a partially qualified subprocess name.
Examples
=ADD SUBPROCESS (\argon.$pc12.#tl06, $rpt.#us05)
=INFO SUBPROCESS ($*.pri*, \ajax.$rpt*.#prt)
=DELETE SUBPROCESS ($fred.#ted, $fred.#red)
$process.#subprocess
( subprocess-name [ , subprocess-name ] ... )