Safeguard Reference Manual (G06.24+, H06.03+ )

SAFECOM Session-Control Commands
Safeguard Reference Manual—520618-013
4-10
DISPLAY Command
DATE
specifies that the current date is displayed in the SAFECOM prompt. The date
is displayed in the form mm/dd/yyyy.
END
specifies that the equal sign (=) is not displayed to terminate the SAFECOM
prompt and that any prompt-item following the word END is ignored.
PROCESS NAME
specifies that the current process name is displayed in the SAFECOM prompt.
PROCESS NUMBER
specifies that the current process number is displayed in the SAFECOM
prompt. The process number is a number from 0 through 255.
SUBVOLUME
specifies that the current subvolume name is displayed in the SAFECOM
prompt.
SYSTEM NAME
specifies that the current system name is displayed in the SAFECOM prompt.
SYSTEM NUMBER
specifies that the current system number is displayed in the SAFECOM
prompt. The system number is a number from 0 through 255.
TIME
specifies that the current time is displayed in the SAFECOM prompt. The time
is displayed in the form hh:mm.
USER NAME
specifies that the current user name is displayed in the SAFECOM prompt. The
name is displayed in the form group name.member name.
USER NUMBER
specifies that the current user ID is displayed in the SAFECOM prompt. The
user ID is displayed as group number,member number.
VOLUME
specifies that the current volume name is displayed in the SAFECOM prompt.