Safeguard User's Guide (G06.24+, H06.03+)

Changing Display Options
Safeguard User’s Guide—422089-009
8-4
Controlling INFO Report Headings
The INFO command WARNINGS option has three forms:
For example, even if you turn off warnings for the session, you can use the following
INFO command to turn on warnings for the command:
=INFO DISKFILE $data.sales.*, WARNINGS ON
The display shows:
Controlling INFO Report Headings
SAFECOM normally displays a heading line above each object reported on by an
INFO command. You can control the display of this heading line for an entire session
with the DISPLAY HEADERS command. This option allows you to either inhibit the
display of the heading line or specify that it should appear only once in an INFO report.
This feature can be convenient if you are requesting information on many objects in a
single INFO command.
DISPLAY HEADERS has four forms:
For example, assume that the subvolume sales contains three files that have been
added to the Safeguard database. To check the authorization records for these files:
=INFO DISKFILE $data.sales.*
WARNINGS
OFF
turns off warning messages for this command.
WARNINGS ON turns on warning messages for this command.
WARNINGS turns on warning messages for this command.
LAST-MODIFIED OWNER STATUS WARNING-MODE
$DATA.SALES
REPORT1 18JUL92, 11:00 2,1 THAWED OFF
NO ACCESS CONTROL LIST DEFINED!
* WARNING * RECORD FOR DISKFILE $DATA.SALES.REPORT2 NOT FOUND
* WARNING * RECORD FOR DISKFILE $DATA.SALES.REPORT3 NOT FOUND
DISPLAY HEADERS OFF turns off the heading line for the session.
DISPLAY HEADERS ON turns on the heading line for the session.
DISPLAY HEADERS turns on the heading line for the session.
DISPLAY HEADERS
ONCE
causes the heading line to appear once at the start of
the INFO report.