SCF Reference Manual for J-Series and H-Series RVUs

SCF Commands
SCF Reference Manual for J-Series and H-Series RVUs—529649-003
5-63
HELP Command
..STATUS LINE $LHX1
.. press Return, causing the command to be executed
For more information on the use of the FC command, refer to the Guardian User’s
Guide .
HELP Command
The HELP command displays the syntax and meaning of SCF commands. See also
Using the F16 HELP Key on page 4-12 and Using the SCF HELP Command on
page 4-21.
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file. The variable file-spec is defined on page 5-9.
ALL
displays general information about the SCF HELP command. This information
includes a list of commands supported by SCF, a list of subsystems supported by
SCF, and a description of how to use the HELP command.
PUP [ command
displays general information about how to convert PUP commands to SCF
commands. If you enter HELP PUP without command , SCF displays a list of the
relevant SCF commands, a list of supported objects, and a list of PUP commands
followed by a brief description of each replacement SCF command. If you enter
PUP with command , SCF displays a brief description of the replacement SCF
command.
HELP [ /OUT file-spec / ]
[ ALL ]
[ PUP [ command ] ]
[ basic-component ]
[ subsystem ]
[ subsystem error-number ]
[ command ]
[ object-type ]
[ object-name ]
[ object-state ]
[ subsystem [ command ] [ object-type ] ]