SCF Reference Manual for J-Series and H-Series RVUs

SCF Commands
SCF Reference Manual for J-Series and H-Series RVUs—529649-003
5-111
STATS Command
STATS Command
The STATS command displays statistical information for the specified object.
OUT file-spec
causes any SCF output generated for this command to be directed to the specified
file. The variable file-spec is defined on page 5-9.
object-spec
designates the objects whose statistical information is to be displayed. The
variable object-spec is defined on page 5-2. If object-spec is omitted, the
statistics for the assumed object are displayed. (See ASSUME Command on
page 5-36.)
RESET
if present, restores all the statistics counters to their initial values after the statistics
are displayed.
RESET is a sensitive option.
SUB [ subobjtype ]
selects the subordinate objects the command affects. The variable subobjtype
can be a subordinate object type or one of the keywords ONLY, ALL, or NONE, as
explained under SCF Subdevices on page 3-5.
SEL [ NOT ] state
directs the command only at objects in the specified state or only at those not in
the specified state. Valid states are listed in Table 3-1 on page 3-7. The use of this
option is subsystem-specific.
STATS [ /OUT file-spec / ] [ object-spec ] [ , RESET ]
[ , SUB [ subobjtype ] ] [ , SEL [ NOT ] state ]