SCF Reference Manual for J-Series and H-Series RVUs

SCF Commands

SCF Reference Manual for J-Series and H-Series RVUs—529649-003

5-129

VERIFY Command

This command tests an object for its ability to meet an object-specific subsystem

quality-control objective. For example, this command identifies defective sectors on a

disk.

This command is sensitive.

OUT

file-spec

causes any SCF output generated for this command to be directed to the specified

file. The variable

file-spec

is defined on page 5-9.

object-spec

designates the object or objects to be verified. The variable

object-spec

defined on page 5-2. If

object-spec

is omitted, the assumed object is verified.

(See ASSUME Command on page 5-36.)

attribute-spec

specifies an attribute and the value associated with the attribute. The attribute and

its value are defined by the subsystem that supports the VERIFY command. The

variable

attribute-spec

is defined on page 5-7.

VERIFY [ /OUT

file-spec

/ ] [

object-spec

]

[ ,

attribute-spec

]…