SCF Reference Manual for J-Series and H-Series RVUs

SCF Error Messages
SCF Reference Manual for J-Series and H-Series RVUs—529649-003
B-32
SCF Error Messages
20303
Cause. File-system error err-num occurred while trying to open the Z subsys SCF
product module for an I/O operation.
Effect. SCF waits for the next command.
Recovery. Refer to the Guardian Procedure Errors and Messages Manual for
recovery from the file-system error. Then retry the command.
20306
Cause. File-system error err-num occurred during a WRITEREAD operation
between SCF and the Z subsys SCF product module.
Effect. SCF waits for the next command.
Recovery. Refer to the Guardian Procedure Errors and Messages Manual for
recovery from the file-system error. Then retry the command.
20307
Cause. (1) The version-level-1 of the Kernel product module is incompatible with
the
version-level-2 product module.
Effect. SCF waits for the next command.
Recovery. Install the proper product module and retry the command, or enter a
PARAM SCF^PM^LOC command (see PAGE 4-19) to identify the location of the
correct product modules.
20308
Cause. SCF is unable to obtain a time-list element (TLE) from the operating system
for use by the product module as a timeout feature.
Effect. SCF waits for the next command.
SCF 20303 - SCF is unable to Open Product module,
$ volume.subvol .Z subsys SCF, name $ proc , Guardian error number,
err-num .
SCF 20306 - Guardian error err-num , communicating with
product module, $ volume.subvol .Z subsys SCF, name $ proc .
SCF 20307 SCF 20307 Incorrect PM version. PMVERSION= version-
level-1 , KERNELVERSION= version-level-2 .
SCF 20308 Unable to obtain TLE for PM to use timeout feature.