SCF Reference Manual for J-Series and H-Series RVUs

SCF Error Messages
SCF Reference Manual for J-Series and H-Series RVUs—529649-003
B-36
SCF Error Messages
Recovery. Refer to the Guardian Procedure Errors and Messages Manual for
recovery from the file-system error. Then retry the command.
20320
Cause. Because of file-system error err-num , the home terminal specified in the
RUN command is not a legal terminal.
Effect. SCF waits for the next command.
Recovery. Retry the RUN command, specifying a valid terminal name.
20321
Cause. The home terminal is unavailable, possibly due to a STOPOPENS command.
Effect. SCF waits for the next command.
Recovery. If the home terminal was specified in the RUN SCF command, then specify
a different home terminal. Otherwise, use the %WT field of a TACL STATUS command
on the home terminal to see why it is not available. STATUS command fields are
described under the PROCESSINFO procedure call in the Guardian Procedure Calls
Reference Manual .
20322
Cause. The system monitor process is currently unavailable.
Effect. SCF waits for the next command.
Recovery. Usually no corrective action is needed. If further problems exist, consult
the person responsible for the system monitor process on your system.
20323
Cause. A file-system error occurred.
SCF 20320 PROCESS_CREATE_ error 8: Illegal home terminal
(Guardian error err-num ).
SCF 20321 PROCESS_CREATE_ error 9: I/O error on home
terminal.
SCF 20322 PROCESS_CREATE_ error 10: Unable to communicate
with system monitor process.
SCF 20323 PROCESS_CREATE_ error 11: Process name error
(Guardian error err-num ).