SCF Reference Manual for J-Series and H-Series RVUs

SCF Error Messages
SCF Reference Manual for J-Series and H-Series RVUs—529649-003
B-52
Common Error Messages
-00033
Cause. There is no more data to display in a response to a continuation request from
SCF to the subsystem.
Effect. SCF terminates.
Recovery. As described under If You Have to Call Your Service Provider on page B-2,
save pertinent information and contact your service provider.
-00034
Cause. The attribute specified in the message is required in conjunction with one of
the attributes for the named object specified in the command.
Effect. SCF waits for the next command.
Recovery. Add the specified attribute with an appropriate value and retry the
command.
-00035
Cause. The attribute named in the message conflicts with one or more of the other
attributes for the specified object.
Effect. SCF waits for the next command.
Recovery. Retry the command, deleting the named attribute.
-00036
Cause. The particular value specified with the named attribute conflicts with one of the
other attribute values for the object.
Effect. SCF waits for the next command.
Recovery. Specify a different value or delete the attribute and retry the command.
subsystem {E|W}-00033 Internal Error: Empty SPI response.
subsystem {E|W}-00034 Attribute attribute-name is required in
conjunction with other attribute(s) for object-name.
subsystem {E|W}-00035 Attribute attribute-name may not be
used with other attribute(s) for object-name.
subsystem {E|W}-00036 Value of attribute attribute-name may
not be used in conjunction with other attribute(s) for
object-name.