SCF Reference Manual for J-Series and H-Series RVUs

SCF Error Messages
SCF Reference Manual for J-Series and H-Series RVUs—529649-003
B-57
Common Error Messages
-00831
Cause. The TRACE work area cannot be locked.
Effect. SCF waits for the next command.
Recovery. As described under If You Have to Call Your Service Provider on page B-2,
save pertinent information and contact your service provider.
-00834
Cause. A TRACE segment cannot be allocated.
Effect. SCF waits for the next command.
Recovery. Stop and restart SCP, explicitly specifying swap space on a volume with
more space. Then retry the request.
-00835
Cause. A TRACE segment is not available.
Effect. SCF waits for the next command.
Recovery. As described under If You Have to Call Your Service Provider on page B-2,
save pertinent information and contact your service provider.
-00836
Cause. The TRACE segment cannot be locked.
Effect. SCF waits for the next command.
Recovery. As described under If You Have to Call Your Service Provider on page B-2,
save pertinent information and contact your service provider.
subsystem {E|W}-00831 Unable to lock trace work area for
object-name.
subsystem {E|W}-00834 Unable to allocate the trace segment
for object-name.
subsystem {E|W}-00835 Trace segment is inaccessible.
subsystem {E|W}-00836 Unable to lock the trace segment.