SCF Reference Manual for J-Series and H-Series RVUs

SCF Error Messages
SCF Reference Manual for J-Series and H-Series RVUs—529649-003
B-60
Common Error Messages
-00851
Cause. The internal table of the TRACE collector is full.
Effect. SCF terminates.
Recovery. As described under If You Have to Call Your Service Provider on page B-2,
save pertinent information and contact your service provider.
-00852
Cause. The parameter parameter-name supplied to the TRACE command is
incorrect.
Effect. SCF waits for the next command.
Recovery. Retry the TRACE command using a valid parameter.
-00853
Cause. The TRACE collector has encountered an internal error.
Effect. SCF terminates.
Recovery. As described under If You Have to Call Your Service Provider on page B-2,
save pertinent information and contact your service provider.
-00854
Cause. A file-system error has occurred while attempting to use the trace file.
Effect. SCF waits for the next command.
Recovery. Refer to the Guardian Procedure Errors and Messages Manual for
recovery from the file-system error.
subsystem {E|W} - 00851 Internal Error: The TRACE collector's
copy table is full.
subsystem {E|W}-00852 Incorrect trace parameter: parameter-
name .
subsystem {E|W} - 00853 Internal Error: The TRACE collector’s
phandle is bad; Detail = number .
subsystem {E|W}-00854 Trace file error; File System Error:
err-num.