SCF Reference Manual for J-Series and H-Series RVUs

SCF Error Messages
SCF Reference Manual for J-Series and H-Series RVUs—529649-003
B-65
Common Error Messages
-00992
Cause. The Subsystem Control Point (SCP) server control block table is full.
Effect. SCF waits for the next command.
Recovery. Start up a new subsystem process and try again.
-00993
Cause. No time-list element (TLE) is available for command timeout.
Effect. SCF waits for the next command.
Recovery. Contact your system manager.
-00994
Cause. The command timeout cannot be set.
Effect. SCF waits for the next command.
Recovery. Wait and try the command again. If this error still occurs, save pertinent
information and contact your service provider, as described under If You Have to Call
Your Service Provider on page B-2.
-00995
Cause. The subsystem’s manager process cannot be accessed; an invalid server
name has been specified in the MANAGER or OBJNAME token.
Effect. SCF terminates.
Recovery. As described under If You Have to Call Your Service Provider on page B-2,
save pertinent information and contact your service provider.
subsystem {E|W}-00992 SCP's server control block table is
full.
subsystem {E|W}-00993 No TLE was available for command
timeout.
subsystem {E|W}-00994 SIGNALTIMEOUT error; could not set
command timeout.
subsystem {E|W} - 00995 Internal Error: invalid name specified
in MANAGER or OBJNAME token.