SCF Reference Manual for J-Series and H-Series RVUs

Using SCF to Configure and Manage NonStop
Integrity NS-Series Servers
SCF Reference Manual for J-Series and H-Series RVUs—529649-003
1-14
SCF Configurable Objects
SCF Configurable Objects
You can use SCF to configure the objects described in this section on systems running
H-series RVUs.
Protocols
This table lists the protocols (also called communications subsystems or access
methods) that are configured through the WAN subsystem, as described in the WAN
Subsystem Configuration and Management Manual .
Devices
Configuration information for these devices is presented in the manuals listed:
Processes
Generic processes, as described in the SCF Reference Manual for the Kernel
Subsystem , are also supported on systems running H-series RVUs.
Protocol Manual
AM3270 AM3270 and TR3271 Configuration and Management Manual
ATP6100 Asynchronous Terminals and Printer Processes Configuration and
Management Manual
CP6100 CP6100 Configuration and Management Manual
Envoy Envoy Configuration and Management Manual
EnvoyACP/XF EnvoyACP/XF Configuration and Management Manual
Expand Expand Configuration and Management Manual
SNAX SNAX/XF and SNAX/APN Configuration and Management Manual
TR3271 AM3270 and TR3271 Configuration and Management Manual
X.25 X25AM Configuration and Management Manual
Device Manual
Disk drives
Tape drives
SCF Reference Manual for the Storage
Subsystem
WAN-connected terminals and printers Asynchronous Terminals and Printer
Processes Configuration and Management
Manual
LAN-connected terminals and printers LAN Configuration and Management Manual