SCF Reference Manual for J-Series and H-Series RVUs

Using SCF to Display Your System’s Configuration
SCF Reference Manual for J-Series and H-Series RVUs—529649-003
2-12
Storage Subsystem Information
Adapter............................... $ZZSTO.#FCSA.GRP-110.MOD-2.SLOT-1
Disk Device ID / Port Name............ (1,1)
Disk Device LUN....................... 0
Location (Group,Module,Slot).......... (110,2,1)
SAC Name............................ $ZZSTO.#FCSA.SAC-2.GRP-110.MOD-2.SLOT-1
SAC Number............................ 2
Disk cache configuration:
Cache Block Size ________________512_________1024_________2048_________4096_
*Blocks Requested: -1 -1 -1 -1
Blocks Allocated: 512 512 512 4096
Bytes Allocated To Cache: 18176 K
Disk Label Information $SYSTEM:
Disk Label Information $SYSTEM Primary:
*Volume Name.......................... $SYSTEM
*Alternate Volume Name................ $YOSQA23
Volume ID............................ 202
Volume Label Verifier................ D2
Volume Label Version................. 0
Operating System Last Mounted Under.. H06 (R06)
Volume Label Last Written............ 18 Mar 2005, 6:26:17.806
Disk Subtype......................... 53
Section Name Address Length Version Parameter
-------------------- ------------- ------------- ------- -------------
0. Spare Tracks Table 000000.000040 000000.000040 0 000000.000000
1. Boot 000000.000000 000000.000000 0 000000.000000
2. Free Space Table 000000.000000 000000.000000 0 000000.000000
3. Directory Label 000000.000100 000000.000100 0 000000.000000
4. Unused 000000.000000 000000.000000 0 000000.000000
5. Undo 000000.000200 000000.000100 0 000000.000000
6. Pool 000000.000000 000000.000000 0 000000.000000
10. Pool-LSA 000000.000100 004213.130520 3 000000.000000
11. Free Space Table-LSA 001227.111514 000000.000120 3 000000.000000
12. Boot-LSA 000000.000000 000000.000000 0 000000.000000
Disk Label Information $SYSTEM Mirror:
No label information is available. Access error 66.
Bad Sectors Information $SYSTEM Primary:
No bad sectors found.
Bad Sectors Information $SYSTEM Mirror:
No bad sectors information is available. Access error 66.
Defect Log Information $SYSTEM Primary:
No defects found.
Defect Log Information $SYSTEM Mirror:
No defect log information is available. Access error 66.
Example 18
LISTDEV TYPE 4 ==Lists configured tape drives
LDev Name PPID BPID Type RSize Pri Program
138 $TAPE0 2,263 3,282 ( 4,9 ) 2048 200 \SUN.$SYSTEM.SYS01.OTPPROCP
368 $DLT25 4,268 5,272 ( 4,9 ) 2048 200 \SUN.$SYSTEM.SYS01.OTPPROCP
369 $DLT24 6,317 7,322 ( 4,9 ) 2048 200 \SUN.$SYSTEM.SYS01.OTPPROCP
370 $DLT23 1,283 0,285 ( 4,9 ) 2048 200 \SUN.$SYSTEM.SYS01.OTPPROCP