ServerNet Cluster Supplement for HP Integrity NonStop NS-series Servers Abstract This supplement describes adding, configuring, and managing an HP Integrity NonStop™ NS-series server in an HP NonStop ServerNet Cluster. Product Version NA Supported Release Version Updates (RVUs) This publication supports H06.03 and all subsequent H-series RVUs until otherwise indicated by its replacement publication.
Document History Part Number Product Version 529933-002 NA Published July 2005
NS-series Servers Examples Tables What’s New in This Manual iii Manual Information iii New and Changed Information About This Supplement v Where to Get More Information Notation Conventions v iii v 1.
Tables Contents Tables Table 1-1. Table 1-2. Table 1-3. Table 1-4. Table 1-5. Table 1-6.
What’s New in This Manual Manual Information ServerNet Cluster Supplement for HP Integrity NonStop NS-series Servers Abstract This supplement describes adding, configuring, and managing an HP Integrity NonStop™ NS-series server in an HP NonStop ServerNet Cluster. Product Version NA Supported Release Version Updates (RVUs) This publication supports H06.03 and all subsequent H-series RVUs until otherwise indicated by its replacement publication.
New and Changed Information What’s New in This Manual NS-series Servers—529933-002 iv
About This Supplement Where to Get More Information For general information on ServerNet clusters, refer to: • • 6770 Switch: ServerNet Cluster Manual and ServerNet Cluster 6770 Supplement 6780 Switch: ServerNet Cluster 6780 Planning and Installation Guide and ServerNet Cluster 6780 Operations Guide Notation Conventions Hypertext Links Blue underline is used to indicate a hypertext link within text. By clicking a passage of text with a blue underline, you are taken to the location described.
General Syntax Notation About This Supplement [ ] Brackets. Brackets enclose optional syntax items. For example: TERM [\system-name.]$terminal-name INT[ERRUPTS] A group of items enclosed in brackets is a list from which you can choose one item or none. The items in the list can be arranged either vertically, with aligned brackets on each side of the list, or horizontally, enclosed in a pair of brackets and separated by vertical lines.
Change Bar Notation About This Supplement Item Spacing. Spaces shown between items are required unless one of the items is a punctuation symbol such as a parenthesis or a comma. For example: CALL STEPMOM ( process-id ) ; If there is no space between two items, spaces are not permitted. In this example, no spaces are permitted between the period and any other items: $process-name.#su-name Line Spacing.
Change Bar Notation About This Supplement NS-series Servers—529933-002 viii
1 NonStop NS-series Server Supplement Except for the differences noted in this supplement, installing and managing an Integrity NonStop NS-series node in a ServerNet cluster is the same as described in these manuals: • • 6770 Switch: ServerNet Cluster Manual and ServerNet Cluster 6770 Supplement 6780 Switch: ServerNet Cluster 6780 Planning and Installation Guide and ServerNet Cluster 6780 Operations Guide Requirements for Clustering 1-2 Software Requirements 1-2 Hardware Requirements 1-4 Open System Mana
Requirements for Clustering NonStop NS-series Server Supplement Requirements for Clustering Configuring an Integrity NonStop NS-series system for inclusion in a ServerNet cluster requires a minimum level of software, hardware, and firmware. You connect the cluster switches to the cluster plug-in cards (PICs) in the processor switches (p-switches) in the Integrity NonStop NS-series system. Use the Add Node to ServerNet Cluster guided procedure.
Software Requirements NonStop NS-series Server Supplement Table 1-1. Minimum Software Requirements (page 2 of 2) (continued) Software Component H-Series Product Version Update (PVU) SNETMON/MSGMON T0294H01 T0294AAP is required on any NonStop S-series nodes in the cluster. SANMAN T0502H01 The PVU required is the same as documented in existing manuals.
Hardware Requirements NonStop NS-series Server Supplement Hardware Requirements At least two 6770 switches or 6780 switches (one for the X fabric and one for the Y fabric) are required. A cable management assembly is required for each 6780 switch. The switches must be installed and powered on. For Integrity NonStop NS-series nodes in a layered topology, you can use either the single-mode fiber (SMF) option or multimode fiber (MMF) option as described in Table 1-2.
NonStop NS-series Server Supplement Open System Management (OSM) Support for NonStop-Series Nodes in a ServerNet Cluster Open System Management (OSM) Support for NonStop-Series Nodes in a ServerNet Cluster For an Integrity NonStop NS-series node, the attributes and actions for the cluster switches are the same as described in the existing manuals and the OSM online help: 6770 switch ServerNet Cluster 6770 Supplement 6780 switch ServerNet Cluster 6780 Operations Guide For detailed information about usi
NonStop NS-series Server Supplement Adding a NonStop-Series Node to a ServerNet Cluster Adding a NonStop-Series Node to a ServerNet Cluster 1. On both the X-fabric and Y-fabric, check that the PICs used to connect the p-switch to the cluster switch are the correct type (either SMF or MMF) as described in Hardware Requirements on page 1-4. 2.
INFO CONNECTION Command (6780 Switch) NonStop NS-series Server Supplement Table 1-3. INFO CONNECTION Attributes for Integrity NonStop NS-series Nodes Attribute Description Port The port number on the PIC located in slot 2 of the p-switch to which the ServerNet cable is attached PIC Type The type of plug-in card used in the p-switch and cluster switch Node Routing ID The node routing ID on the p-switch and cluster switch Example 1-1.
INFO CONNECTION Command Display (6770 Switch) NonStop NS-series Server Supplement INFO CONNECTION Command Display (6770 Switch) The syntax for INFO CONNECTION has not changed. Example 1-2, INFO CONNECTION Display for a 6770 Switch, on page 1-8 shows the display for a 6770 switch connected to an Integrity NonStop NS-series node: • • • The Node port heading contains information about the p-switch port that connects to the cluster switch.
NonStop NS-series Server Supplement STATUS CONNECTION Command (6780 Switch) STATUS CONNECTION Command (6780 Switch) The STATUS CONNECTION syntax has not changed, except that the NNA option is not supported for Integrity NonStop NS-series nodes.
NonStop NS-series Server Supplement STATUS CONNECTION Command (6780 Switch) Table 1-5.
STATUS CONNECTION Command (6780 Switch) NonStop NS-series Server Supplement Example 1-3.
NonStop NS-series Server Supplement STATUS CONNECTION Command (6770 Switch) STATUS CONNECTION Command (6770 Switch) The STATUS CONNECTION syntax has not changed, except that the NNA option is not supported for Integrity NonStop NS-series nodes.
NonStop NS-series Server Supplement STATUS CONNECTION Command (6770 Switch) Table 1-6. STATUS CONNECTION Attributes for Integrity NonStop NS-Series Nodes (page 2 of 2) Attribute Description Port Status The status of the p-switch port or cluster switch port. Possible values for are: • • • • • link alive LINK DEAD RESET LA, DISABLED UNINSTALLED NNA Prog State The programming state of the NNA on the p-switch.
STATUS CONNECTION Command (6770 Switch) NonStop NS-series Server Supplement Example 1-4.
Safety and Compliance This section contains three types of required safety and compliance statements: • • • Regulatory compliance Waste Electrical and Electronic Equipment (WEEE) Safety Regulatory Compliance Statements The following regulatory compliance statements apply to the products documented by this manual. FCC Compliance This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
Regulatory Compliance Statements Safety and Compliance Korea MIC Compliance Taiwan (BSMI) Compliance Japan (VCCI) Compliance This is a Class A product based on the standard or the Voluntary Control Council for Interference by Information Technology Equipment (VCCI). If this equipment is used in a domestic environment, radio disturbance may occur, in which case the user may be required to take corrective actions.
Regulatory Compliance Statements Safety and Compliance European Union Notice Products with the CE Marking comply with both the EMC Directive (89/336/EEC) and the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community.
SAFETY CAUTION Safety and Compliance SAFETY CAUTION The following icon or caution statements may be placed on equipment to indicate the presence of potentially hazardous conditions: DUAL POWER CORDS CAUTION: “THIS UNIT HAS MORE THAN ONE POWER SUPPLY CORD. DISCONNECT ALL POWER SUPPLY CORDS TO COMPLETELY REMOVE POWER FROM THIS UNIT." "ATTENTION: CET APPAREIL COMPORTE PLUS D'UN CORDON D'ALIMENTATION. DÉBRANCHER TOUS LES CORDONS D'ALIMENTATION AFIN DE COUPER COMPLÈTEMENT L'ALIMENTATION DE CET ÉQUIPEMENT".
Waste Electrical and Electronic Equipment (WEEE) Safety and Compliance HIGH LEAKAGE CURRENT To reduce the risk of electric shock due to high leakage currents, a reliable grounded (earthed) connection should be checked before servicing the power distribution unit (PDU).
Important Safety Information Safety and Compliance NS-series Servers—529933-002 Statements -6
