ServerNet Cluster Supplement for NonStop NS-Series Servers (H06.03+)

NonStop NS-series Server Supplement
NS-series Servers—529933-002
1-6
Adding a NonStop-Series Node to a ServerNet
Cluster
Adding a NonStop-Series Node to a ServerNet Cluster
1. On both the X-fabric and Y-fabric, check that the PICs used to connect the p-switch
to the cluster switch are the correct type (either SMF or MMF) as described in
Hardware Requirements on page 1-4.
2. If the PICs in both the cluster switch and p-switch do not match or are not
supported for the type of cluster switch, replace or add the correct type of PIC to
either the cluster switch or p-switch as needed.
3. Start the guided procedure for adding an Integrity NonStop NS-series node to a
new or existing ServerNet cluster:
a. In the tree pane of the OSM Service Connection, right-click the system
resource and select Actions.
b. From the Available Actions drop-down list, select Add Node to ServerNet
Cluster.
c. Click Perform Action.
d. In the guided procedure, click Start.
Subsystem Control Facility (SCF) Displays for
NonStop NS-Series Nodes in a ServerNet
Cluster
For detailed syntax and descriptions of the SCF commands, refer to:
For an Integrity NonStop NS-series node, the commands and displays are the same as
described in the existing manuals except for the differences noted here.
INFO CONNECTION Command (6780 Switch)
The syntax for the INFO CONNECTION command has not changed. In Example 1-1,
INFO CONNECTION Display for a 6780 Switch, on page 1-7, the display shows a
6780 switch connected to an Integrity NonStop NS-series node:
•
The Node port heading contains information about the port on the p-switch. This
port heading replaces the MSEB port heading used for NonStop S-series nodes.
•
The NNA Version attribute does not appear in the displays for the Node Port.
•
Table 1-3, INFO CONNECTION Attributes for Integrity NonStop NS-series Nodes,
on page 1-7 lists the attributes whose descriptions have changed for Integrity
NonStop NS-series nodes.
6770 Switch ServerNet Cluster Manual
6780 Switch ServerNet Cluster 6780 Operations Guide